ARRI ARRIFLEX 235 4.6 Grip System

Installation

additional

3/8“ mounting point

hexagonal screws

mounting screw 5mm allen key

4.6 Grip System

The multipurpose grip system on the ARRIFLEX 235 guarantees high stability through its fixed connection to the camera body and provides numerous possibilities for attaching accessories. 3/8“ inner threads allow attachment in various positions. The versatile system adapts to all needs depending on the magazine used with the camera.

Standard Camera Handle

The standard camera handle is a single post handle. It can be mounted in two positions to the camera using two hexagonal screws ➪ photo. In one position, the handle grip is positioned above the camera, in the center of gravity. This is useful for low handheld shots, but only works with the two 235 Shoulder Magazines. In the other position, as seen on the photo, all magazines can be accommodated.

The handgrip can be attached to any of the 3/8” holes by first placing the 2 pins ➪ photo into the according pin holes on the post and then fastening the handgrip screw

➪photo inside the handgrip by using a long 5mm allen key.

Note:	If the standard camera handle is attached in the
	other position and the handgrip is mounted to
	the additional 3/8” hole the handgrip is
	positioned in the center of gravity.

20