Composite Video Outputs

Composite video is only available if the output is switched to VBS out.

•To switch to composite video (VBS mode), enter the main menu by pressing the Enter/Insert key Ñ for more than 3 seconds. Go to sub menu VIDEO/TEXT ADJUST. The menu line BNC OUT can be switched between VBS and Y/C. See chapter 10.4 Inserter Facilities for information on the on-screen program mode.

The difference between the outputs is that there is normal video on the one connector and video with data on the other.

In the normal video output, marked with the È/C symbol

➪photo, almost no electronic information is inserted. Only a rolling bar at the button left corner of the video image indicates a running film camera.

In the video with data output, marked with the É/Y symbol

➪photo, additional data such as format marks or camera status information can be inserted.

The outputs are standard BNC sockets for 75 Ω terminated video signals. Both outputs can be used simultaneously.

MENU VIDEO/TEXT ADJUST

- FLICKERFREE

ON

- LINE INTERP.

ON

-> - BNC OUT

VBS

Y/C DATA

 

- MINI MON DATA

ON

- TXT WHITE LEV.

2

- TXT INVERS

ON

-TXT FINE POS. 2

-EXIT

É/Y È/C

Video-Assist-System

73