4.5 Lens Support

The lens support consists of the lens support LS-7 (can be snapped onto 19 mm support rods) ➪ photo or the lens support LS-8 (can be pushed onto 15 mm support rods) and the respective lens support ring ➪ photo for the lens in use.

•Mount the lens support onto the support rods from above and let it click into place by applying slight pressure (push the LS-8 onto the support rods from the front).

•Slide the relevant support ring ➪ photo onto the lens but do not tighten.

•Then slide the lens into the lens mount receptacle and lock.

•Connect the support ring to the lens support and tighten the knurled screw ➪ photo as well as the clamping lever ➪ photo.

•Complete the process by tightening the clamp screw ➪ photo on the support ring.

Note:

Mounting the support ring on the relevant lens

 

is usually carried out only once. The support

 

ring can then remain in position on the lens.

lens support

lens support ring

clamp screw

base plate

 

 

 

 

 

 

LS-8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

knurled screw

lens support

clamping lever

wedge plate

LS-7

 

 

Installation

19