10.4 Inserter Facilities

In addition to the usual video assist functions, the IVS offers a variety of inserter facilities. There are two different groups of information:

•Format markings

Format markings, which are inserted electronically, are often more visible than format markings on the ground glass.

•Man readable information Camera status

System line Additional text

 

All inserted data are only available at the outputs

 

Video with data.

 

All engravings from the ground glass (e. g. TV-

 

Safe etc.) are visible at all times at all outputs.

Note:

All currently used settings are stored even if the

 

IVS or the camera is switched off or disconnected

 

from the power supply. After restarting the IVS

 

the settings are unchanged, except for the image

 

stored mode, which will always come up in live

 

mode.

10.4.1 Setting the On-Screen Displays

During programming the inserted data are not fully updated (e. g. Frame Counter Information). To get information updated, leave the on-screen display menu by pressing the Enter/Insert key

Ñfor more than three seconds.

Once the on-screen display is activated by pressing the Enter/Insert key Ñ for more than three seconds, the following procedure is used to select and set all functions within the main menu and the sub menus:

•Pressing the key Ê or Ë will move the cursor > up or down. Pressing the key Í or Ì activates sub menus.

Video-Assist-System

95