4. Installation of the Camera

4.1 Packing and Transport

4.2 Tripod Heads

Installation

In order to prevent damage to the mirror shutter, a protective cap must be on the lens mount receptacle at all times.

When transporting the camera, pay attention that the movement is in the locked position

➪photo.

If the ARRIFLEX 235 is transported or stored without a magazine, the magazine opening cover ➪ photo should be attached.

Loaded or empty magazines should only be transported or stored with the loop protector

➪photo attached to avoid damage to the film stock and the magazine throat assembly.

The following tripod heads are suitable for use with the ARRIFLEX 235:

•ARRIHEAD

•ARRIHEAD 2

•ARRIHEAD 2 with integrated encoders

•ARRI Fluid-Heads

•Sachtler Studio 7, 150 H

•Mitchell-Head

•Moy-Head

•Ronford F7

•Hot-Head

•Cam-Remote-Head

•Worall-Head

In applications where the camera mount is subject to high forces (e.g. helicopter mounts) the camera must be additionally secured with retaining cords. All fastening screws must be tightened firmly with an appropriate screwdriver (not with the commonly used coin!).

15