If the film counter is in the take mode, the data in meter, foot or seconds of the last take are displayed. In the mode footage, the added length of the film through the camera in meter or feet is displayed.
During programming the inserted data are not fully updated (e. g. Frame Counter Information). To get information updated, leave the
After powering the film camera up, no mirror shutter angle is displayed. Data will appear only after some revolutions of the mirror shutter.
System line and Status line are together as a package. If both lines are on, the upper line will always be status, the lower line system. Positioning always affects both lines.
Like all man readable information, the data is inserted as a window on the monitor image. The window can be switched on and off independently. Background and position can be altered without affecting the settings of other windows.
MENU SYSTEM/STATUS |
|
ON | |
- STATUS LINE | ON |
- POSITION |
|
- BACKGROUND | BOXED |
- FILM COUNTER | FTGE |
- EXIT |
|
|
|
The adjustment of the white level of the inserted data, an inverse display and a fine adjustment of the vertical position is described in chapters 10.4.5 White Level, Inverse and Fine Positioning.
• Enter the System/Status submenu from the main menu.
Changing them immediately activates all settings. Check all settings on the connected monitor.
123