Video-Assist-System
handle
screws for IVS
•Push the IVS as shown until the gap between the camera and the IVS closes.
•Close the screws on the IVS ➪ photo with a 3 mm allen key.
•Remount the handle ➪ photo and close the screws on the base of the handle with a 3 mm allen key.
10.2.2 Cabling
Outputs
In case the composite output should be used and it is unknown, weather the BNC connectors on the IVS are switched to composite or to Y/C, please connect the composite signal to the É/Y first and check the settings (BNC OUT VBS or Y/C) in the menu video/text adjust. Please see next chapter Composite Video Outputs.
The IVS has two BNC sockets, which can be switched to output two independent composite signals or one Y/C signal. Additionally, there is an output for a mini monitor
72