Camera Body

Note:

Before the movement block is swung forwards,

Note:

Threading the film is also described and

 

make sure that the film is correctly positioned in

 

displayed on the inside of the camera door.

 

relation to the film gate over the entire area,

 

 

 

otherwise the film may be damaged!

 

 

•Turn the movement locking lever counter-clockwise as far as it will go. This will cause the movement block to swing forwards and to lock into position.

•By turning the inching knob ➪ photo, check that the film runs smoothly.

•Close the camera door.

positioning pin

loop marking

movement locking lever

inching knob

44