Reactivating Image Compensation
•Turn the adjustment knob ➪ photo until it locks in position. Do not depress the locking key.
Note: | The automatic image compensation locks in two |
| positions, 180° apart. This allows the image |
| compensation to be set to provide an upright |
| image when using a finder extension. |
If the viewfinder image is inverted without the finder extension, the image compensation must be adjusted to the opposite locking position.
Inverting the Image
•Depress the locking key ➪ photo and keep depressed.
•Turn the adjustment knob ➪ photo.
•Release the locking key ➪ photo.
•Keep turning the adjustment knob ➪ photo until this locks in position.
fastening screws
Removing the Viewfinder System
Before removing the viewfinder system, the viewfinder arm should be brought back to its normal position.
•Loosen the three fastening screws ➪ photo.
•Pull the viewfinder system up and off.
Attaching the Viewfinder System
•Position the viewfinder system on the camera body from above.
•Tighten the fastening screws.
Optics
51