OperationCamera

Display

Warning tone on start

Warning tone on stop

 

 

 

 

 

 

 

 

 

LS _ _

off

off

 

 

 

 

LS – _

on

off

 

 

LS _ –

off

on

 

 

LS – –

on

on

 

 

 

 

 

Switching On and Off the Warning Signal for Asynchronous Running (Mode 4)

Standby Operation

•Change from Mode 1 to Mode 4 by depressing the “MODE”-button three times.

•By depressing the “SEL”-button once, activate the display for setting the warning signal.

•Within three seconds, depress the “SET”-button to select one of the four settings.

•Depressing the “MODE”-button confirms the selection.

Setting the Volume of the Warning Signal

•Change from Mode 1 to Mode 4 by depressing the “MODE”-button three times.

•Depress the “SEL”-button two times to activate the display for setting the warning signal volume.

•Select the desired volume with the “SET”-button. 0…off

3…maximum volume

64