•To switch between normal video and video with data, use the on-screen program mode. Enter the main menu by pressing the Enter/Insert key Ñ for more than 3 seconds. Go to sub menu VIDEO/TEXT ADJUST. The menu point Y/C DATA, which can only be reached if BNC OUT is on Y/C, switches between normal video and video with data on the Y/C signal. The line displays Y/C DATA ON or OFF.

See chapter 10.4 Inserter Facilities for information on the on-screen program mode.

In the normal video output almost no electronic information is inserted. Only a rolling bar at the lower left corner of the video image indicates a running film camera.

In the video with data output, additional data such as format marks or camera status information can be inserted.

The É/Y socket is standard BNC for 75 Ω video outputs

➪photo.

Video-Assist-System

77