Asante Technologies 1012 manual Snmp Community Name Table

Configuration Menu System

3	Press return to set the new value.
4	Repeat steps 1-3for any other fields you want to modify.
5	Highlight the COMMUNITY STRING field for the IP
	address you want and press return to open the data entry
	bar.
6	Enter the new string; press return to set the value.
7	Repeat steps 5-6for the other community string fields.
8	Highlight the STATUS field you want to modify.
9	This is a toggle. Press the spacebar or return to switch.

10 Again using the arrow keys, highlight the SNMP Authenti- cation Trap field.

11 This is also a toggle. Press the spacebar or return to switch between Enabled and Disabled.

12 Enter control-z to return to the SNMP Agent Parameters Menu.

SNMP Community Name Table

Figure 3-12 SNMP Community Name Table

Page 3-19