ASAI Installation
Prerequisites for ASAI Installation
To install the Adjunct/Switch Application Interface feature on the CONVERSANT Voice Information System (VIS) Version 3.1, you need the following:
■One or more Tip/Ring cards (IVP4, IVP6, or a VRS6) with Signal Processor installed
OR
one or more T1 cards (AYC11 or AYC3B) with Signal Processor installed
■Network Support Utilities (1.2) Version 2.0
■One ISDN PC Interface (IPCI) card
■The Adjunct/Switch Application Interface feature package
■Configurator program output
For information on installing the VIS software and hardware, refer to the CON- VERSANT Voice Information System Software Installation and Upgrade and the hardware installation and upgrade book for your platform.
NOTE:
Confirm that Adjunct/Switch Application Interface is installed and available on the switch you are using. Refer to the DEFINITY Communications Sys- tem Generic 1 and Generic 3i Installation and Test Manual ,
