AT&T 585-350-812 manual Initialize Ipci Board

ASAI Administration

NOTE:

The domain must be disabled before it can be removed.

Initialize IPCI Board

The IPCI Board must be initialized when it is taken off-line. The Initialize IPCI Board procedure downloads the driver software onto the card and puts the card on-line. The IPCI card is now actively using the link.

!WARNING:

The “Initialize IPCI Board” command should be used only as an error recovery procedure for the card. You do not need to initialize the IPCI card each time that you diagnose the card.

NOTE:

If the IPCI card is already initialized and on-line, the card must first be taken off-line before it can be re-initialized.

The Initialize IPCI Board screen contains information on what occurred during ini- tialization of the IPCI card. The Initialize IPCI Board screen displays information as to whether the initialization was a success or failure and the reason for the fail- ure. Figure 4-12 displays an example of the Initialize IPCI Board screen with IPCI card initialization information displayed.

To initialize the IPCI card from the ASAI Administration screen, highlight “Initialize IPCI Board”, then press ENTER .

Initialize IPCI Board

IPCI Board Initialization completed successfully.

Press ENTER to continue.

PREVPAGE NEXTPAGE CANCEL CHG-KEYS

Figure 4-12. Initialize IPCI Board Screen

4-20