AT&T 585-350-812 manual Installing Asai Hardware, Base RAM Address Selection Switches

ASAI Installation

Installing ASAI Hardware

Prior to installation, you should run the configurator program. For information on running the configurator program, refer to Chapter 3, “Allocating System Resources” in the hardware installation and upgrade book for your platform. Referring to the output from the show_config command and Figure 3-3,set the Base RAM address selection switches on the IPCI card. Figure 3-2 shows the location of the Base RAM address location switches. Figure 3-3shows the various switch settings for the Base RAM selection switches.

Red LED

	HEADSET
RAM	PHONE
	LINE

Base RAM Address Selection Switches

Figure 3-2. IPCI Card

3-4