B&K 8510 instruction manual Setting /Reading the list repeat mode CH/3DH

From 10th byte to 13th byte	Setting value of resistance B (Lower bytes are in the front location, higher bytes are in
	the later location)
From 14th byte to 15th byte	Time value of timer B (Lower bytes are in the front location, higher bytes are in the later
	location) (1 represent 0.1mS)
16th byte	Transition operation mode (0 is CONTINUES,1 is PULSE,2 is TOGGLED)
17th byte to 25th byte	System reserve
26th byte	Sum code

15．Selecting /Reading the list operation mode (CC/CV/CW/CR)（3AH/3BH）

1st	byte	Start bit ( AAH )
2nd	byte	Address (0—0XFE)
3rd	byte	Command（3AH/3BH）
4th byte		LIST operation mode（0is CC mode，1 is CV mode ,2 is CW mode,3 is CR mode）
From 5th to 25 byte		System reserve
26th byte		Sum code

16. Setting /Reading the list repeat mode. (3CH/3DH)

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command（3CH/3DH）
4th byte	LIST repeat operation mode(0 is ONCE, 1 is REPEAT)
From 5th to 25th byte	System reserve
26th byte	Sum code

17. Setting / Reading the number of list steps. (3EH/3FH)

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command（3EH/3FH）
From 4thto 5th byte	LIST steps
From 6th to 25th byte	System reserve
26th byte	Sum code

18. Setting / Reading one of the step’s current and time values. (40H/41H)

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command（40H/41H）
From 4th byte to 5th byte	Appointed one step
From 6th to 9th byte	Current value of current step (Lower bytes are in the front location, higher bytes are in the
	later location)

45