B&K 8510 instruction manual Sending a trigger signal to trigging the electronic load AH

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command （58H/59H）
4th byte	Trigger mode (0:Keypad,1 External,2.command)
From 5th to 25th byte	System reserve
26th byte	Sum code

32. Sending a trigger signal to trigging the electronic load. (5AH)

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command（5AH）
From 4th to 25th byte	System reserve
26th byte	Sum code

33.Saving / Recall user’s setting value in appointed memory area for recall. (5BH/5CH)

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command（5BH/5CH）
4th byte	Storing area ( )
From 5th to 25th byte	System reserve
26th byte	Sum code

34.Selecting / Getting FIXED/SHORT/TRAN/LIST/ BATTERY function mode. (5DH/5EH)

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command（5DH/5EH）
4th byte	Work mode (0:FIXED,1:SHORT, 2:TRANSITION,3:LIST,4: BATTERY)
From 5th to 25th byte	System reserve
26th byte	Sum code

35.Reading input voltage, current, power and relative state. (5FH)

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command （5FH）
From 4th to 7th byte	Actual input voltage value (Lower bytes are in the front location, higher bytes are in the
	later location)
From 8th to 11th byte	Actual input current value (Lower bytes are in the front location, higher bytes are in the

49