From 4th to 22nd byte | Information in bar code（ASICmode） |
| |
|
|
From 23rd to 25th byte | System reserve |
26th byte | Sum code |
Bar code rule ：All of bar cod of our products is distinguished by the former three characters.
Identity
d
Sub
d
Version
Year
Month
Month
b t h
No. N of one batch
0
0
1
0
0
4
1
0
0
y
y
m m 0
0
2
0
1
0
47. Setting information of bar code（6CH）
1st byte | Start bit ( AAH ) |
2nd byte | Address |
3rd byte | Command（6CH） |
| |
|
|
4th to 22nd byte | Product series number（ASIC code） |
| |
|
|
24th byte | System reserve |
25th byte | System reserve |
26th byte | Sum code |
48. The return information of command operation in electronic load（12H）
1st byte | Start bit ( AAH ) | |
2nd byte | Address | |
3rd byte | Command（12H） | |
| ||
|
|
|
4th byte | Command calibration result | |
From 5th to 25th byte | System reserve | |
26th byte | Sum code | |
|
|
|
NOTE
Receiving one frame command and verify them
If verify sum is wrong, return the parameter 90H
If setting parameter is wrong or over brim, return parameter A0H.
If command is not enforce, return to parameter B0H
If command is invalid, return to parameter C0H
Otherwise, return to parameter 80H
NOTE
Receiving one frame command and verify them
If verify sum is correct, return the relative reading data
If verify sum is wrong, return the verify command (90H)
54
