B&K 8510 instruction manual Setting / Reading CR mode resistance value（30H/31H）

7th	byte	The highest byte of max power value
8th	to 25th byte	System reserve
26th byte		Sum code

NOTE

Represent power by 4 bytes of Hex. Lower bytes are in the front location, higher bytes are in the later location. For example :power is 200.000W，Hex is 0X00030d40，4th byte is 0X40，5th byte is 0X0d，6th byte is 0X03，7th byte is

0X00。

10. Setting / Reading CR mode resistance value（30H/31H）

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command（30H/31H）
4th byte	The lowest byte of resistance value.
5th byte	The lower byte of resistance value.
6th byte	The higher byte of resistance value.
7th byte	The highest byte of resistance value.
8th to 25th byte	System reserve
26th byte	Sum code

NOTE

Represent resistance value by 4 bytes of Hex. Lower bytes are in the front location, higher bytes are in the later location. If resistance value is 200.000R，Hex code is 0X00030d40，4TH byte is 0X40，5TH byte is 0X0d，6th byte is 0X03，7th byte is 0X00。

11. Setting /Reading CC mode transient current and timer parameter. （32H/33H）

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command（32H/33H）
From 4th byte to 7th byte	Setting value of current A (Lower bytes are in the front location, higher bytes are in the
	later location.)
From 8th byte to 9th byte.	Time value of timer A ((Lower bytes are in the front location, higher bytes are in the later
	location) (1 represent 0.1mS)
From 10th to 13th byte	Setting value of current B (Lower bytes are in the front location, higher bytes are in the
	later location)
From 14th to 15th byte	Time value of timer B (Lower bytes are in the front location, higher bytes are in the later
	location) (1 represent 0.1mS)
16th byte	Transition operation mode (0 is CONTINUES, 1 is PULSE, 2 is TOGGLED)
From 17th to 25th byte	System reserve

43