2AH | B&K 8510 specs

25H	Reading the max setup input current.

26H	Setting max input power.

27H	Reading the max setup input power.

28H	Selecting CC/CV/CW/CR operation mode of Electronic load.

29H	Reading the operation mode.

2AH	Setting CC mode current value

2BH	Reading CC mode current value

2CH	Setting CV mode voltage value

2DH	Reading CV mode voltage value

2EH	Setting CW mode watt value

2FH	Reading CW mode watt value

30H	Setting CR mode resistance value

31H	Reading CR mode resistance value

32H	Setting CC mode transient current and timer parameter.

33H	Reading CC mode transient parameter

34H	Setting CV mode transient voltage and timer parameter.

35H	Reading CV mode transient parameter

36H	Setting CW mode transient watt and timer parameter

37H	Reading CW mode transient parameter

38H	Setting CR mode transient resistance and timer parameter

39H	Reading CR mode transient parameter

3AH	Selecting the list operation mode (CC/CV/CW/CR)

3BH	Reading the list operation mode.

3CH	Setting the list repeat mode (ONCE / REPEAT)

3DH	Reading the list repeat mode.

3EH	Setting the number of list steps.

3FH	Reading the number of list steps

40H	Setting one of the step’s current and time values.

41H	Reading one of the step’s current and time values.

42H	Setting one of the step’s voltage and time values.

43H	Reading one of the step’s voltage and time values

44H	Setting one of the step’s power and time values

45H	Setting one of the step’s power and time values.

46H	Setting one of the step’s resistance and time values

47H	Reading one of the step’s resistance and time values

48H	Setting list file name.

49H	Reading list file name.

4AH	Selection the memory space mode for storing list steps.

4BH	Reading the memory space mode for storing list steps.

4CH	Save list file in appointed area.

4DH	Get the list file from the appointed area.

4EH	Setting min voltage value in battery testing mode.

4FH	Reading min voltage value in battery testing mode

50H	Setting timer value of FOR LOAD ON

38

Image 38

B&K 8510 instruction manual 2AH

Contents

Instruction Manual Programmable DC Electronic Load Table of Contents Warranty Information Safety Symbols Quick Reference Front Panel Rear Panel Front Panel Display Key Pad Immediate Action KeysFront Panel Menus Tran POWER-ON Recall Menu Operation ADC Update Rate High Lowdefault Document Orientation Options and AccessoriesGeneral Information Getting Started Map Description Features and CapabilitiesAccessories Front Panel Controls Remote Programming Constant Resistance CR ModeConstant Voltage CV Mode Operating Modes Continuous Constant Power CW ModeTransient Operation Pulse Trigger ModeList Operation Short On/Off Triggered OperationInput Control Operation Range Protection FeaturesInput On/Off Over Voltage Pin trigger and remote sensing connectors Over PowerOver Temperature Remote Sense Function and Trigger Function Saving and Recalling Settings Wiring diagram for remote sense Battery Testing Operation Von/Voff Operation Action for set Von/Voff value Location InstallationInspection Bench Operation Power CordOutline Diagram Input Connections Introduction Checkout ProcedureTurn-On Checkout Trigger and Remote Sensing Connections Display Front Panel OperationCase of Trouble Front Panel Display Example PowerSet set up a constant current from 0 to Max current Function keys POWER=*.***W Set set up a constant power from 0 to Max powerSet set up a constant resistance from 0.1Ω to 4000Ω 000V On/Off input setting Transition Testing OperationSet set up a constant voltage from 1.5V to Max voltage Shift + Store Pulse Transient Operation Transition Parameter SettingContinuous Transient Operation Toggled Transient Operation Steps List Operation Quick Recall Function Automatic Testing Function of Electronic LoadEdit the Testing File Enter Automatic Testing Setting the Resolution and number of decimal points Specifications Range Accuracy Resolution IT-E131 RS232 Communication cable Remote Operation ModeCommunication cable IT-E132 USB Communication cable IT-E132 communication Communication between electronic load and PCFrame Format 2AH Selecting the Remote control mode（20H） Communication Protocol Selecting the input on/off state （21H） Setting / Reading max input voltage（22H/23H）Setting / Reading the max input current .（24H/25H） Setting / Reading max input power（26H/27H） Setting / Reading CW mode watt value（2EH/2FH） Setting / Reading CC mode current value（2AH/2BH）Setting / Reading CV mode voltage value.（2CH/2DH） Setting / Reading CR mode resistance value（30H/31H） 26th byte Sum code Setting /Reading the list repeat mode CH/3DH Setting / Reading the number of list steps EH/3FH Setting / Reading List file name 48H/49H Setting / Reading timer value of for Load on 50H/51H） Save / Get list file in appointed area. CH/4DH Selecting / Reading trigger source H/59H Setting communication address 54HEnable/Disable Local control mode H Sending a trigger signal to trigging the electronic load AH Reading input voltage, current, power and relative state FH Enter the calibration mode（60H） BIT Getting the calibration mode state（61H） Calibrate voltage value（62H） Store the calibration data to EEPROM（66H） Setting / Reading calibration information（67H/68H）Calibrate current value（64H） Reading information in bar code 6BH Restore the factory default calibration data（69H）For example： Setting information of bar code（6CH） Service Information Limited One-Year Warranty Declaration of CE Conformity Savi Ranch Parkway Yorba Linda, CA