99
CHAPTER 6: Operation
2. In the Group box, enter the name of a new group; or click on the arrow and
choose a name from the display list of groups already created.
3. In the Notes box (optional), enter any information about the group.
4. In the Site box, click on a site to narrow your selection to a particular site.
In the Rack box, click on a rack to narrow your selection to a particular rack.
In the Line box, click on a line to narrow your selection to a particular line.
Click on the + button to add your selection to the Currently Defined Group
Member list.
5. In the Currently Defined Group Members area, to remove any unwanted
member from the list, click on a member and click the – button.
6. Click on...
SAVE to save your group.
CLEAR to clear the display.
DELETE to delete the group.
EXIT to exit the screen.
NOTE
Clicking on SAVE only stores your changes to the program’s temporary
memory.
To fully save your changes to the map file, remember to select File, then Save
(As) from the main menu before exiting HP OpenView.
Default Switch
Follow this procedure to create or modify default switch definitions for predefined
switch groups which you create.
1. From the main menu, select Pro Switching System, then Definitions, then
Default Switch. The Default Switch Definitions screen appears (see Figure
6-13).