187
APPENDIX D: Proprietary MIB
Parameters: no_signal(0) the line card, port, or lead
state is not present.
sleep(1) the alarm definition is
inactive (specified by
sigAlarmStart and
sigAlarmStop)
green(2) the alarm definition is active
but not in an alarm condition
orange(3) the alarm definition is
approaching an alarm
condition
red(4) the alarm definition is in an
alarm condition
MIB Path: 1.3.6.1.4.1.509.1.7.1.10
iso(1).org(3).dod(6).internet(1).private(4).ent
erprises(1).Hadax(509).
IntelliSwitch2000(1).sigAlarmTable(7).sigAlar
mEntry(1).sigAlarmState(10)
Variable: 1.3.6.1.4.1.509.1.7.1.10.[sigAlarmIndex]
where [sigAlarmIndex] is a number (from 1 to
32) of an alarm definition to which the alarm
status is assigned.
Example: Display the status of alarm index 1.
Operation: Get
Variable: 1.3.6.1.4.1.509.1.7.1.10.1
sigAlarmComment
Description: A user comment that describes the alarm
definition. You can SET and GET the value of
this variable.
Parameters: Up to 31 characters
MIB Path: 1.3.6.1.4.1.509.1.7.1.11
iso(1).org(3).dod(6).internet(1).private(4).ent
erprises(1).Hadax(509).
IntelliSwitch2000(1).sigAlarmTable(7).sigAlar
mEntry(1).
sigAlarmComment(11)