89
CHAPTER 6: Operation
To Protect Your Map
1. From the main menu, select Options, then Protect Map. The protect map
screen appears.
2. Enter a password.
3. Click OK to enable. The word “Protected” is displayed in the status bar at the
bottom of the OpenView window.
To Unprotect Your Map
1. From the main menu, select Options, then Unprotect Map. The unprotect
map screen appears.
2. Enter the correct password.
3. Click OK to unprotect map and resume editing.
NOTE
The protect password is stored in the OVWIN.INI file under the
[OpenView] section using the Key= string value. If you forget your
password, simply delete the coded password entry in the OVWIN.INI file.
Log In
Follow this procedure to log into OpenView at a new security level. The security
level dialog box appears at the start of OpenView if a password has been assigned.
There are three levels of security: Supervisor, Operator, and Observer. The
Supervisor has full privileges to OpenView features; the Operator has limited
privileges; and the Observer has minimal privileges.
The right-hand side of the description bar shows the current login status of the
user.
To Log In
1. From the main menu, select Options, then Log In. The Log In screen
appears.
2. Select the security level—Supervisor, Operator, or Observer.
3. Enter a password.
4. Click OK to set.