103
CHAPTER 6: Operation
Figure 6-15. Standard Alarms.2. In the Alarm Definition Name box, enter the name of a new definition; or
click on the arrow and choose a name from the display list of definitions
already created.
3. In the Notes box (optional), enter any information that may be helpful to
you.
4. In the Version A and Version B boxes, choose the appropriate interface—RS-
232, RS-530, or V.35. Version A allows setting alarms on the same leads of
Common, A, and B. Version B reduces the number of leads available on A
and B.
5. In the Standard Alarm Criteria area, for each port (COM, A, B) and each
lead (TD, RD, etc.) desired, select a State (Disable, Mark, Space, No Data)
and a Duration (1-999 seconds) that the lead(s) must continue in that state to
trigger an alarm. (Note that a D (Disable) setting will not display when the
screen is recalled.)
6. Click on...
SAVE to save your definition.