201
APPENDIX D: Proprietary MIB
Example: Set the bus code to 30 for bus-triggered
switching operation 1.
Operation: Set
Variable: 1.3.6.1.4.1.509.1.10.1.2.1
Set Value: 30
busTrigOpSwitchToPort
Description: Port switched to when the code (set in the
‘busTrigOpCode’ variable) is detected on the
bus. You can SET and GET the value of this
variable.
Parameters: A(1), B(2), C(3), D(4), normal(5)
MIB Path: 1.3.6.1.4.1.509.1.10.1.3
iso(1).org(3).dod(6).internet(1).private(4).ent
erprises(1).Hadax(509).
IntelliSwitch2000(1).busTrigOpTable(10).busT
rigOpEntry(1).
busTrigOpSwitchToPort(3)
Variable: 1.3.6.1.4.1.509.1.10.1.3.[busTrigOpIndex]
where [busTrigOpIndex] is a number (from 1
to 32) of a bus-triggered switching operation to
which the port (A, B, C, D, normal) is assigned.
Example: Switch to port B when the specified code is
detected on the bus for bus-triggered switching
operation 4.
Operation: Set
Variable: 1.3.6.1.4.1.509.1.10.1.3.4
Set Value: B(2)
busTrigOpCardsList
Description: List of line cards to switch. This is a list of line
cards separated by white spaces. For example,
to switch the first, third, and tenth line cards,
busTrigOpCardsList would be: 1 3 10. You can
SET and GET the value of this variable.
Parameters: Line cards 1 to 16