205
APPENDIX D: Proprietary MIB
powerFanStatusChange 2 This trap is generated when the value of the
‘powerFanStatus’ variable changes. The trap
returns information on the ‘powerFanStatus’
variable as listed below. For more information
on the variable, see its listing presented earlier
in the chapter.
powerFanStatus—
Description: Status of the power supply fan.
Parameters: absent(0) Power supply fan is not
installed
ok(1) Power supply fan is
functioning properly
fail(2) Power supply fan is installed
but not functioning
Variable: 1.3.6.1.4.1.509.1.2.1.3.[powerIndex]
where [powerIndex] is
1 for power supply 1
2 for power supply 2
sigAlarmChange 3 This trap is generated when the value
of the ‘sigAlarmState’ variable changes. The
trap returns information on the ‘sigAlarmState’
variable as listed below. For more information
on the variable, see its listing presented earlier
in the chapter.
sigAlarmState—
Description: The current status of the alarm.
Parameters: no_signal(0) the line card, port, or lead
state is not present.
sleep(1) the alarm definition is
inactive (specified by
sigAlarmStart and
sigAlarmStop)
green(2) the alarm definition is active
but not in an alarm condition