207
APPENDIX D: Proprietary MIB
gangSwitchPush—
Description: Setting this variable pushes the gang switch
button on the rack to perform group switching
on the line cards. Pushing the A(1), B(2), C(3),
or D(4) button forces all line cards to switch to
the A, B, C, or D port, respectively. Pushing the
N(5) button forces all line cards to switch to
their normal (user-defined) port. Pushing the
SET_N(6) button defines the current port of
each line card as its normal port.
Parameters: Yes(1) to push the gang switch button.
Variable: 1.3.6.1.4.1.509.1.3.1.2.[gangSwitchIndex]
where [gangSwitchIndex] is
1 for pushbutton A (port A)
2 for pushbutton B (port B)
3 for pushbutton C (port C)
4 for pushbutton D (port D)
5 for pushbutton N (normal)
6 for pushbutton SET N (set
normal)
rackIpRequester—
Description: The IP address of the remote entity that last
requested a switch. The null value is returned if
this is a local manual switch.
Parameters: IP address
Variable: 1.3.6.1.4.1.509.1.1.14.0
where 0 indicates that the variable is not part of
a table
lineCardChange 6 This trap is generated when a line card
is inserted or removed. The trap returns
information on the ‘lineInterfaceType’ variable
as listed below. For more information on the
variable, see its listing presented earlier in the
chapter.