171
APPENDIX D: Proprietary MIB
MIB Path: 1.3.6.1.4.1.509.1.4.1.4
iso(1).org(3).dod(6).internet(1).private(4).ent
erprises(1).Hadax(509).
IntelliSwitch2000(1).monBusTable(4).monBus
Entry(1).
monBusLineChanIndex(4)
Variable: 1.3.6.1.4.1.509.1.4.1.4.[monBusIndex]
where [monBusIndex] is
1 for monitor bus digital one
2 for monitor bus analog
3 for monitor bus digital two
Example: Select the first channel of the line card for
monitoring on the analog bus.
Operation: Set
Variable: 1.3.6.1.4.1.509.1.4.1.4.2
Set Value: 1
Note that you will also need to SET a specific
line card for monitoring and SET a monitoring
mode for the line card in your request, using
the ‘monBusLineCardIndex’ and
‘monBusMode’ variables.
D.6 Line Cards
The following variables allow you to view line card status or perform line card
operations for your unit.
lineInterfaceType
Description: The interface type of the line card (for
example, RS-232). You can only GET the value
of this variable.
Parameters: none(0), rs232(1), rs530(2), V35(3), x21(4),
isdn(5), V24(6)