100
PRO SWITCHING SYSTEM
Figure 6-13. Default Switch Screen.2. In the Definition Name box, enter the name of a new definition; or click on
the arrow and choose a name from the display list of definitions already
created.
3. In the Notes box (optional), enter any information that may be helpful to
you.
4. In the Group box, click on the arrow and choose a group to which you will
assign default switches for its members.
If no groups are listed, you must first create a group by selecting Pro
Switching System, then Definitions, then Groups from the main menu. See
the “Group” section (on the previous two pages)of this chapter for step-by-
step procedures.
5. In the Currently Defined Group Member box, select (highlight) one or
several members by clicking on them. Click on them again to unselect.
In the Switch To box, click on A, B, C, or D to define the switch positions of
the selected members.
Repeat this step until all members have been selected and assigned default
switches.
Pro Switching System - Default Switch Definitions