193
APPENDIX D: Proprietary MIB
You can activate or inactivate your alarm-
triggered switching operations using this
variable. You can SET and GET the value of
this variable.
Parameters: active(1) activate the row
notInService(2) inactivate the row
notReady(3) inactivate the row
createAndGo(4) process the row, and activate
createAndWait(5) process the row, but remain
inactive
destroy(6) delete the row
MIB Path: 1.3.6.1.4.1.509.1.8.1.7
iso(1).org(3).dod(6).internet(1).private(4).ent
erprises(1).Hadax(509).
IntelliSwitch2000(1).alarmTrigOpTable(8).alar
mTrigOpEntry(1).
alarmTrigOpRowStatus(7)
Variable: 1.3.6.1.4.1.509.1.8.1.7.[alarmTrigOpIndex]
where [alarmTrigOpIndex] is a number (from
1 to 32) of an alarm-triggered operation to
which the row status is assigned.
Example: Process all variables for alarm-triggered
operation 1 and make this row active.
Operation: Set
Variable: 1.3.6.1.4.1.509.1.8.1.7.1
Set Value: createAndGo(4)
D.10 Time-Triggered Operations
The following variables allow you to perform time-triggered switching operations
for your unit. In general, all variables having a common ‘timeTrigOpIndex’ (which
you select) are part of the same time-triggered operation.
timeTrigOpTime
Description: Time of the switching operation. You can SET
and GET the value of this variable.