62
PRO SWITCHING SYSTEM
Enter… In order to…
SET RACK n ECHO ON|OFF
Set echo on or echo off for rack n.
SET RACK n IP ADDRESS x.x.x.x
Define the rack IP address. Default value: 0.0.0.0
SET RACK n LINE x|ALL PORT p
Perform switching operations. This is not a configuration setting.
Entering this command switches one line or all lines to a
specified port.
SET RACK n PING x.x.x.x
Start a ping to the specified destination. An ICMP ECHO request
is sent every second until you press a key. Only one ping can be
active at a time.
SET RACK n SNMP DEFAULTS
Set all MIB variables to their default values.
SET RACK n SNMP MANAGER m IP ADDRESS x.x.x.x
Define an SNMP manager to where traps will be sent. Managers
#1 through #16 are supported. Manager #1 will be defined for
trap transmission to be enabled. Default value: [all values are
cleared]