72
PRO SWITCHING SYSTEM
Description Guide, which the hardware installation technician(s) have turned in.
Master forms for these guides are provided in Appendix A. You must also have
available the following for each:
• Name for the network (collection of all sites controlled from the PC).
• Sites to include in the network.
• Racks to include on each site.
NOTE
Default USER ID and PASSWORD: The system is shipped with the
default user ID as blackboxand default password as blackbox, both of
which are case sensitive. You must use these to gain entry to the
OpenView program. You must also use them to open a map, until new
Ids and passwords have been defined for one or more users. You can
then delete the default ID and password from the map database.
CAUTION
Once you’ve deleted the default ID and password from a map database,
the only entry to the map is via the newly defined supervisor ID(s) and
password(s). If no one can remember a valid password and ID, the map
is permanently locked and inaccessible.
NOTE
Under the Menu Bar item options, you can customize HP OpenView. In
particular, you can define a map as a default map. When you do this, the
OpenView program opens directly to the default map rather than the
vestibule. However, note the caution on the previous page about
deleting the password. If no one can remember a valid password and ID
for the default map, then not only the map, but OpenView itself is locked
an inaccessible. (To remedy this, edit the OVWIN.INI file. Delete the
name of the default map that appears after the equals sign in the line:
MAP=.)
6.2.2 P
RELIMINARY
N
OTESAND
C
AUTIONS
Deleting a Submap
Do not attempt to delete a Submap by using the OpenView path Edit: Submap:
Delete Submap. Instead, click on the submap icon, then use Edit: Delete.
Renaming a Site
Rename a site only if you have not yet added any components on that site.
Choose site names carefully so you won’t need to change them later.