190
PRO SWITCHING SYSTEM
Example: Define a list of alarms—sigAlarmIndex 1, 3, 12,
and 28—to trigger a switching operation.
Assign this list to alarm-triggered switching
operation 1.
Operation: Set
Variable: 1.3.6.1.4.1.509.1.8.1.2.1
Set Value: 1 3 12 28
alarmTrigOpSwitchToPort
Description: Port switched to when an alarm(s) occur(s).
You can SET and GET the value of this
variable.
Parameters: none(0), A(1), B(2), C(3), D(4), normal(5)
MIB Path: 1.3.6.1.4.1.509.1.8.1.3
iso(1).org(3).dod(6).internet(1).private(4).ent
erprises(1).Hadax(509).
IntelliSwitch2000(1).alarmTrigOpTable(8).alar
mTrigOpEntry(1).
alarmTrigOpSwitchToPort(3)
Variable: 1.3.6.1.4.1.509.1.8.1.3.[alarmTrigOpIndex]
where [alarmTrigOpIndex] is a number (from
1 to 32) of an alarm-triggered operation to
which the port entry (none, A, B, C, D, normal)
is assigned.
Example: Switch to port C when the alarms occur for
alarm-triggered switching operation 2.
Operation: Set
Variable: 1.3.6.1.4.1.509.1.8.1.3.2
Set Value: C(3)
alarmTrigOpCardsList
Description: List of line cards to switch. This is a list of line
cards separated by white spaces. For example,
to switch the first, third, and tenth line cards,
alarmTrigOpCardsList would be: 1 3 10. You
can SET and GET the value of this variable.