170
PRO SWITCHING SYSTEM
monBusLineCardIndex
Description: The line card selected for monitoring. You can
SET and GET the value of this variable, but you
must also include the ‘monBusMode’ variable
in your SET request.
Parameters: Line card 1 to 16
MIB Path: 1.3.6.1.4.1.509.1.4.1.3
iso(1).org(3).dod(6).internet(1).private(4).ent
erprises(1).Hadax(509).
IntelliSwitch2000(1).monBusTable(4).monBus
Entry(1).
monBusLineCardIndex(3)
Variable: 1.3.6.1.4.1.509.1.4.1.3.[monBusIndex]
where [monBusIndex] is
1 for monitor bus digital one
2 for monitor bus analog
3 for monitor bus digital two
Example: Select line card 9 for monitoring on the analog
bus.
Operation: Set
Variable: 1.3.6.1.4.1.509.1.4.1.3.2
Set Value: 9
Note that you will also need to SET a
monitoring mode for the line card in your
request, using the ‘monBusMode’ variable.
monBusLineChanIndex
Description: The line card channel selected for monitoring.
By default, the value of this variable is set to
‘not_connected.’ You can SET and GET the
value of this variable, but you must also include
the ‘monBusLineCardIndex’ and
‘monBusMode’ variables in your SET request.
Parameters: not_connected(0) [default], first_channel(1),
second_channel(2)