119
CHAPTER 6: Operation
The Network selection has the following sub-selections:
• Broadcast
• Health Checks
• Report
Broadcast
Perform this procedure to define network time and to broadcast it.
You should broadcast network time early in the process of creating a network
map—after you have done both of the following:
• defined at least one rack on a site
• defined and enabled the PC port that communicates with the site
Once you have broadcast the network time, it is automatically downloaded to
new racks when you add them to the network.
You will need to broadcast the time again only if you change the time setting.
To Define Network Time and Broadcast It
1. From the main menu, select Pro Switching System, then Network, then
Broadcast. The Broadcast Control screen appears.
2. Enter the current time and date.
3. Click on UPDATE to save the network time you have defined to the PC and to
broadcast it to the racks in the network.
4. To broadcast to selected sites...
Click on the desired sites on the list
Click on SELECTED to broadcast to the selected sites.
5. To broadcast to all sites, click on ALL.
6. Click on EXIT to exit the screen.
Health Checks, System (All Sites)
Perform this procedure to define a schedule for checking system sites.