126
PRO SWITCHING SYSTEM
2. To create a new user, click on New.
To edit a user, click on the user from the list in the lower panel and click
Replace.
To delete a user, click on the user from the list in the lower panel and click
Delete.
3. In the Name box, enter user ID to be defined.
4. In the Password box, enter the password of the user to be defined.
5. Click on one of the privilege levels (Definitions, Operations, Network
Modifications, or Supervisor) to assign to the user.
6. Click on Add to add a user (transfer from the upper to lower part of the
screen) to the list.
7. Click on...
SAVE to save your changes.
EXIT to exit the screen.
NOTE
In the Name field, when you enter one or more characters, the ADD
button becomes active (changes from gray to black). However, before
you can ADD the user to the list below, you must also enter at least one
character in the Password field, and click on at least one option box.
NOTE
Clicking on SAVE only stores your changes to the program’s temporary
memory.
To fully save your changes to the map file, remember to select File, then Save
(As) from the main menu before exiting HP OpenView.
6.5.6 R
ACK
S
TATUS
S
CREEN
The Rack Status screen shows real-time views of the front and rear of the rack, as if
you were standing in front of it.
From the Rack Status screen, you can perform switching and other functions
using point-and-click mouse operations, instead of selecting from the main menu.
The Rack Status screen does not replace all of the main menu selections, but
offers some capabilities that allow you to control your racks and system from a
more visual point of view.