130
PRO SWITCHING SYSTEM
From the line card status screen, you can
• Perform individual line card switching.
• Bridge a line card to a bus.
• Enter the Scheduled Switching screen.
• Enter the Standard Alarm screen.
• Enter the Alarm Triggered Switching screen.
To Display the Line Card Status Screen
1. From the site-level submap, double-click on the site icon containing the target
line card. The rack-level submap appears.
2. From the rack-level submap, double-click on the rack icon containing the
target line card. The front view of the rack appears.
3. From the front view of the rack, double-click on the target line card. The line
card status screen appears.
NOTE
The line card status screen may take several seconds to display all
information, depending upon your polling frequency settings.
To Perform Individual Line Card Switching
In the bottom left corner of the screen, click on desired switch position: A or B.
NOTE
Switching may take several seconds to occur, depending upon your
polling frequency settings.
To Bridge the Line Card to the Monitor Bus
In the bottom left corner of the screen, click on Bridge to bridge the line card to
the monitor bus, or click on Normal to remove the bridge.
NOTE
Bridging may take several seconds to occur, depending upon your
polling frequency settings.