128
PRO SWITCHING SYSTEM
To Perform Individual Line Card Switching
1. Click on the letter box, located at the bottom of the line card. The line card
switches to the next available position.
2. Repeat step 1 until the desired switch position is set.
NOTE
Switching may take several seconds to occur, depending upon your
polling frequency settings.
To Perform Gang Switching
Click on one of the gang switch buttons — N, A, B, C, or D — located on the
upper portion of the control card. All applicable line cards switch to the gang
switch position. (For the N gang switch button, see the Customized Gang Switching
section, below.)
NOTE
Switching may take several seconds to occur, depending upon your
polling frequency settings.
Customized Gang Switching
To Define the ‘Normal’ Switch Positions
1. For each line card, click on the letter box (located at the bottom of the line
card) to set the switch to the desired position.
2. When all the line card switch positions are set, click on the NORM SET
button (located on the control card). This defines the current switch
positions as the “Normal” positions to switch to when you press the N gang
switch button.
To Perform “Normal” Gang Switching
Click on the N gang switch button, located on the upper portion of the control
card. All line cards switch to their predefined normal positions.
NOTE
Switching may take several seconds to occur, depending upon your
polling frequency settings.