58
PRO SWITCHING SYSTEM
5.3 Software/Management Installation
To install the software and management PC:
• Install the management PC (Section 5.3.1).
• Install the software (HPOpenView and SNMP application software). See
Section 5.3.2 and 5.3.3.
5.3.1 I
NSTALLINGTHE
M
ANAGEMENT
PC
You can manage a Pro Switching System from an IBMcompatible computer
installed with HPOpenView and the SNMP application software (SM701A).
The Minimum PC Requirements:
Processor: 486DX2
RAM: 16 MB
Display: VGA
Operating System: Windows 95
To Install a Management PC
1. Follow the manufacturer’s installation instructions for setting up your PC.
2. Install a remote access device (modem, Ethernet card, etc.) into your PC that
will allow you to connect to the racks using TCP/IP. Follow the
manufacturer’s installation instructions for installing the device.
5.3.2 I
NSTALL
HP O
PEN
V
IEW
Install the C2.14 Release
1. Insert the HP OpenView installation CD into your CD-ROM drive.
2. From your Windows 95 desktop, click on Start, Run… The Run screen
appears.
3. Enter the following: E:\OV214\Disk1\Setup (if necessary, replace E:\ with the
correct letter of the CD-ROMdrive).
Installation begins. Follow all installation instructions that appear on your
screen.