45
CHAPTER 5: Installation
Table 5-3 (continued). DIPSwitches at DS5
Switch Position In order to… Notes
3 ON Disable the NORM SET and When you enable
N gang switch buttons. NORM SET, you can
use the control card
NORM SET switch
and the N gang
switch. When you
disable NORM
OFF Enable the NORM SET and SET, you cannot use
N gang switch buttons. these switches.
4, 5, 6 OFF – Always set to OFF.
7, 8 7 8 All racks at a site
ON ON Set the baud rate to 2400 bps. must use the same
OFF ON Set the baud rate to 4800 bps. baud rate. The baud
ON OFF Set the baud rate to 9600 bps. rate DIP switches set
OFF OFF Set the baud rate to 19200 bps. the baud rate for
communication
between the rack and
the management PC.