211
APPENDIX D: Proprietary MIB
busTrigOpSwitch 11 This trap is generated when a bus-
triggered switch is executed. The trap returns
information on the ‘lineSwitchedPort’ and
‘busTrigOpComment’ variables as listed below.
For more information on the variables, see
their listings presented earlier in the chapter.
lineSwitchedPort—
Description: The port switched to (for example, port A).
Parameters: A(1), B(2), C(3), D(4), normal(5)
Variable: 1.3.6.1.4.1.509.1.5.1.4.[lineCardIndex]
where [lineCardIndex] is the slot number (1
through 16) occupied by the line card.
busTrigOpComment—
Description: User comment for each bus-triggered switching
operation.
Parameters: Up to 31 characters
Variable: 1.3.6.1.4.1.509.1.10.1.5.[busTrigOpIndex]
where [busTrigOpIndex] is a number (from 1
to 32) of a bus-triggered switching operation
to which the user comment is assigned.
lineSwitchError 12 This trap is generated when a card was
unable to switch to the port value in the
‘lineSwitchedPort’ variable. The trap returns
information on the ‘lineSwitchedPort’ variable
as listed below. For more information on the
variable, see its listing presented earlier in the
chapter.
lineSwitchedPort—
Description: The port switched to (for example, port A).
Parameters: A(1), B(2), C(3), D(4), normal(5)