209
APPENDIX D: Proprietary MIB
linePatchingChange 8 This trap is generated when a patch
cable is plugged or unplugged. The trap
returns information on the ‘linePatching’
variable as listed below. For more information
on the variable, see its listing presented earlier
in the chapter.
linePatching—
Description: Indicates whether or not patching is possible
and if so, whether or not a patch cable
is inserted.
Parameters: none(0) the line card does not have
patch capabilities
cable_out(1) the line card has patch
capabilities; a patch cable is
not inserted
cable_in(2) the line card has patch
capabilities; a patch cable is
inserted
Variable: 1.3.6.1.4.1.509.1.5.1.8.[lineCardIndex]
where [lineCardIndex] is the slot number
(1through 16) occupied by the line card.
alarmTrigOpSwitch 9 This trap is generated when an alarm-
triggered switch is executed. The trap returns
information on the ‘lineSwitchedPort’ and
‘alarmTrigOpComment’ variables as listed
below. For more information on the variables,
see their listings presented earlier in the
chapter.
lineSwitchedPort—
Description: The port switched to (for example, port A).
Parameters: A(1), B(2), C(3), D(4), normal(5)
Variable: 1.3.6.1.4.1.509.1.5.1.4.[lineCardIndex]
where [lineCardIndex] is the slot number (1
through 16) occupied by the line card.