Extension Oven Rack (some mod- els)
Getting Started
CAUTION
To avoid burns, place oven racks in desired positions before turning oven on. Always use oven mitts when the oven is warm.If a rack must be moved while the oven is hot, do not let oven mitts contact hot heat- ing elements.
Inserting Racks Into Oven
1.Grasp rack firmly on both sides.
2.Tilt rack up to allow stop into rack guide.
3.Bring rack to a horizontal position and press the rest of the way in. Rack should be straight and flat, not crooked.
Back of rack
Front of rack
Insert rack with the back of the rack toward the back wall of the range.
Figure 3: Inserting a Rack
Removing Flat Racks From Oven
1.Grasp rack firmly on both sides and pull rack toward you.
2.When the stop is reached, tilt rack up and pull the rest of the way out.
The Full Extension Rack allows for easier access to cooking foods. The bottom section extends as far as the standard flat rack. However, the top section extends beyond the bottom section bringing the food closer to the user. To order a full extension rack, contact Service or a dealer near you.
Back of Rack | Pan Stops |
Top Rack
Top Rack
Stop (Ball)
Bottom | Stops | Rack Guide |
Rack |
Top Rack Rest
Front of Rack
Figure 4: Full Extension Rack
Removing and Replacing
Note: The full extension rack must be in the closed position when removing and replacing. Grasp the entire rack (both sections).
1.Grasp the bottom section and pull straight out.
2.Once the stop is reached, grasp the top section and pull straight out until the second stop is reached. If the top rack will not extend fully, it is not installed correctly. Reinstall it so that the pan stop is in the back of the oven.
English 7
