Breville BPR600XL Issue - A12 manual Troubleshooting

TROUBLESHOOTING

PROBLEM	EASY SOLUTION
EO is displayed on	a.	Check that lid is closed properly.
LED Screen	b. Check that the Pressure Release Valve is in the
		correct position.
	c.	Make sure the silicone rubber gasket is attached
		properly to the gasket holder and is securely in place
		on the lid.
E1 is displayed on	•	Unplug unit and allow to sit for 20 minutes. If no
LED Screen		change, Please call Breville Consumer Service.
E2 is displayed on	•	Ensure the cooking bowl is properly positioned
LED Screen		inside base. The cooking bowl must be in direct
		contact with the heating plate. Make sure there are
		no unwanted materials on the heating plate.
E3 is displayed on	•	Ensure the lid is off the appliance or placed on top
LED Screen		to rest in an offset position when you are using the
		SAUTÉ/SEAR setting.
The appliance automatically	•	Add more water to cooking bowl and restart the
switches to Keep Warm		cooking cycle.
without going through a
complete cooking cycle
Air is escaping from the rim	a.	Install sealing gasket correctly.
of the lid	b. Clean sealing gasket.
	c.	Replace sealing gasket.
	d.	Lock lid again.
Steam is released from the	a.	Clean sealing gasket.
pressure indicator valve	b. Replace sealing gasket.
during cooking
	c.	Change silicone rubber gasket every 1–2 years.
The pressure indicator rod	a.	Place Pressure release valve in the correct position.
does not rise in PRESSURE	b. Place more food and water in the cooking bowl.
COOK setting
	c.	Call Breville Consumer Service.
Lid is hard to open or cannot	a.	Check if the pressure indicator locking pin is in the
be opened		upright position. If it isn't, push down with aid of a
		pencil or like item, jiggle the lid and disengage. This
		will allow the air to escape and the lid should open.

63