Load your document.
Enter the number of copies you want.
Press d or c to display Skew Adjustment.
Press Skew Adjustment. Press Auto (or Off).

Chapter 11

Paper Size (Tray #1)

If you are copying on paper other than A4 size, you will need to change the paper size setting. You can copy only on Ledger, A3, Letter, Legal, A4, A5 or Photo 10 cm ⋅ 15 cm paper.

Note

If you want to change the Paper Size for Tray #2, see Paper Size and Type

on page 29.

a Press (Copy). b Load your document.

c Enter the number of copies you want. d Press d or c to display Paper Size. e Press Paper Size.

f Press A4, A5, 10x15cm, Letter, Legal, A3 or Ledger.

g If you do not want to change additional settings, press Mono Start or Colour Start.

Tray Select

You can change the tray that will be used for the next copy. To change the default tray see Tray use in Copy mode on page 29.

a Press (Copy). b Load your document.

c Enter the number of copies you want.

d Press d or c to display Tray Select.

e Press Tray Select.

f Press Tray#1 or Tray#2.

g If you do not want to change additional settings, press Mono Start or Colour Start.

98

Skew Adjustment

If your copy is scanned skewed, your machine can correct the data automatically. This setting is only available when using the scanner glass and Enlarge/Reduce is set to 100% copy.

a Press (Copy).

b c d

e f

g If you do not want to change additional settings, press Mono Start or Colour Start.

Note

•Page Layout, Enlarge/Reduce, Book Copy and Watermark Copy are not available with Skew Adjustment.

•You cannot use this setting with Ledger, A3 or paper smaller than 64 mm ⋅ 91 mm.

•This setting is only available for paper that is rectangular or square.

•Skew Adjustment is only available if the document is skewed by less than

3 degrees.

•Skew Adjustment may not work correctly if your document is too thick.