Broadcasting (Monochrome only)
Broadcasting is when the same fax message is automatically sent to more than one fax number. You can include Groups,
One Touch, Speed Dial numbers and up to 50 manually dialled numbers in the same broadcast.
After the broadcast is finished, a Broadcast Report will be printed.
a Press 
(Fax). b Load your document.
c Press d or c to display Broadcasting.
d Press Broadcasting.
e You can add numbers to the broadcast in the following ways:
Press Add Number and enter a number using the buttons on the LCD.
Press OK.
Press Phone Book.
Press 
to search by Alphabetical Order or Numerical Order. Press the entries that you want to add to the broadcast.
Press OK.
Note
One Touch Dial locations begin with l. Speed Dial locations begin with #.
f After you have entered all the fax numbers by repeating step e, press OK.
Sending a Fax
g Press Mono Start.
Note
•If you did not use up any of the numbers for Groups, you can ‘broadcast’ faxes to as many as 256 different numbers.
•The available memory will vary depending on the types of jobs in the memory and the number of locations used for broadcasting. If you broadcast to the maximum numbers available, you will not be able to use dual access and delayed fax.
• If the memory is full, press Stop/Exit to | 5 |
stop the job. If more than one page has been scanned, press Mono Start to send the portion that is in the memory.
43