
Chapter 2
g Close the paper tray cover.
Check that the paper is flat in the tray and below the maximum paper mark (1).
1
h Slowly push the paper tray completely into the machine.
Note
If you are finished using A3, Ledger or Legal size paper and want to use a smaller paper size, take the paper out of the tray. Then shorten the tray by pressing the universal guide release button (1). Adjust the paper length guide (2) to fit the paper size you are going to use. Then put the paper into the tray.
1

DO NOT push Tray #1 into the machine too quickly. Doing this may cause injury to your hand by trapping it between Tray #1 and Tray #2. Please push Tray #1 slowly.
i While holding the paper tray in place, | 2 |
| |
pull out the paper support (1) until it |
|
clicks, and then unfold the paper |
|
support flap (2). |
|
2
1
12