Printing photos from a memory card or USB Flash memory drive

Glass Scan Size

To scan a Letter, Legal, Ledger, or A3 size document, you need to change the Glass Scan Size setting. The default setting is A4.

a Press (Scan). b Press Scan to Media.

c Press d or c to display Glass Scan Size.

d Press Glass Scan Size.

e Press A4, A3, Letter, Legal or Ledger.

Note

•You can save the setting you use most often by setting it as the default. (See Setting your changes as a new default on page 119.)

•This setting is only available for scanning documents from the scanner glass.

How to change the file name

You can change the file name.

a Press (Scan). b Press Scan to Media.

c Pressd or c to display File Name.

d Press File Name.

Press to delete characters. Then enter the new file name (up to

6characters). (See Entering Text on page 205.)

e Press OK.

How to set a new default

You can save the Scan to Media settings (Quality, File Type, and

Glass ScanSize) you use most often by setting them as the default settings. These settings will stay until you change them again.

a Press (Scan). b Press Scan to Media.

c Pressd or c to display Set New Default.

d Press Set New Default. e Press Yes to confirm. f Press Stop/Exit.

How to reset to factory settings

You can restore the machine to factory settings.

a Press (Scan). b Press Scan to Media.

c Press d or c to choose Factory Reset.

12

d Press Factory Reset. e Press Yes to confirm. f Press Stop/Exit.

121