Printing photos from a memory card or USB Flash memory drive

Colour Enhancement

You can turn on the colour enhancement feature to print more vivid images. Printing time will be slower.

a Press Print Setting.

b Press a or b to display Color Enhance.

c Press Color Enhance. d Do one of the following:

„If you want to customize the White Balance, Sharpness or Colour Density, press On, and then go to step e.

„If you do not want to customize, press Off.

Go to step h.

e Press White Balance, Sharpness or Color Density.

f Press d or c to adjust the degree of the setting.

Press OK.

g Do one of the following:

„If you want to customize another colour enhancement, repeat steps e to f.

„If you want to change other settings,

Note

•White Balance

This setting adjusts the hue of the white areas of an image. Lighting, camera settings and other influences will affect the appearance of white. The white areas of a picture may be slightly pink, yellow or some other colour. By using this setting, you can correct that effect and bring the white areas back to pure white.

•Sharpness

This setting enhances the detail of an image, similar to adjusting the fine focus on a camera. If the image is not in true focus and you cannot see the fine details of the picture, then adjust the sharpness.

•Colour Density

This setting adjusts the total amount of colour in the image. You can increase or decrease the amount of colour in an image to improve a washed out or weak picture.

12

press to display the print setting menu and press the setting you want to change. (See page 114.)

h If you do not want to change additional

settings, press .

Press Colour Start to print.

117