Chapter 5

Dual access (Monochrome only)

You can dial a number and start scanning the fax into memory—even when the machine is sending from memory, receiving faxes or printing PC data. The LCD shows the new job number and available memory.

The number of pages you can scan into the memory will vary depending on the data that is printed on them.

Note

If the Out of Memory message appears while scanning documents, press Stop/Exit to cancel or Mono Start to send the scanned pages.

Real time transmission

When you are sending a fax, the machine will scan the documents into the memory before sending. Then, as soon as the telephone line is free, the machine will start dialling and sending.

If the memory is full and you are sending a black & white fax from the ADF, the machine will send the document in real time (even if Real Time TX is set to Off).

Sometimes, you may want to send an important document immediately, without waiting for memory transmission. You can turn on Real Time TX.

a Press (Fax). b Load your document.

c Press d or c to display Real Time TX. d Press Real Time TX.

e Press On.

Note

In real time transmission, the automatic redial feature does not work when using the scanner glass.

46

Overseas Mode

If you are having difficulty sending a fax overseas due to possible interference on the telephone line, we recommend that you turn on the Overseas mode. After you send a fax using this feature, the feature will turn itself off.

a Press (Fax). b Load your document.

c Press d or c to display Overseas Mode.

d Press Overseas Mode.

e Press On (or Off).

Delayed Faxing (Monochrome only)

During the day you can store up to 50 faxes in the memory to be sent within 24-hours. These faxes will be sent at the time of day you enter in step f.

a Press (Fax). b Load your document.

c Press d or c to display Delayed Fax.

d Press Delayed Fax.

e Press On.

f Enter the time you want the fax to be sent (in 24-hour format) using the buttons on the LCD.

(For example, enter 19:45 for 7:45 PM.) Press OK.

Note

The number of pages you can scan into the memory depends on the amount of data that is printed on each page.